1 / 3
T Handle Hex Key Allen Wrench Holder (MMU) — zdjęcie 1
1 / 3

T Handle Hex Key Allen Wrench Holder (MMU)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These holders were made of the hex key set purchased at Harbor Freight.

Ocena
0 / 5
Polubienia
25
Pobrania
163
Wydruki
0
Wyświetlenia
2163
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

These models were made for the hex key set from Harbor Freight. The MMU models have a small text inset to allow for easy painting, but prints flush when sliced. The non MMU models have a 1mm inset. 

One thing I am frustrated with in all Hex Key sets is they are separated by SAE and Metric. Most times I know I need a big or small hex key but have no idea if it will be SAE or Metric. These holders were made to sort by size, not standard.

These holders have a hole that is 1mm larger than the hex key at the top, and a clip below that is the exact hex key size. This creates a friction fit below, but a solid holder at the top that avoid the wrenches being knocked off.

 

Tagi