Fishing Line / Thread Winder Drill Spool Attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for a power drill to quickly unwind fishing line from the reel. Starter slot to help hold the line.
- Ocena
- 5 / 5
- Polubienia
- 82
- Pobrania
- 297
- Wydruki
- 1
- Wyświetlenia
- 1500
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
V2 is shorter with a thicker driveshaft for strength. Shows about 15% less filament usage as I have it currently sliced.
Use higher wall and infill counts for strength along the stress point of the drill mount. Also consider PETG or another material with appropriate durability for the slight torque stress.
There is very little stress on the winder shaft as long as you don't over tighten the chuck — and also don't go full speed into the end of the line when it's still tied to another reel. Cut it when it's close!
If the line or thread doesn't grab in the slot, tight a quick knot at the end and rehook it in place.
Scale as you need, just mind the size of the drill fitting!