1 / 1
Parametric Magnet Orientation Tool — zdjęcie 1

Parametric Magnet Orientation Tool

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tool for finding the orientation of magnets. Modeled in OpenSCAD. Parametric for use with other diameters and heights.

Ocena
5 / 5
Polubienia
3
Pobrania
29
Wydruki
1
Wyświetlenia
207
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

This is a tool for checking the orientation of small hobby magnets before permanently gluing them into place. It was modeled in OpenSCAD and is parametric so you can easily create models for different diameters and heights of magnets.

Print Method 1

Use a filament change halfway through to achieve the color change. I used tree/natural supports for the bottom hole and they printed fine.

Print Method 2

Split the model by dropping it halfway below the build plate. Repeat with another copy but flip it upside down. Print each half in separate colors then glue them together.

Tagi