Ultra-compact frame for Celestron Vibration Suppression Pads to use for silent printing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalistic easy to print frame replacement for Celestron Vibration Suppression Pads. Designed them to be used on a…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 437
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Minimalistic easy to print frame replacement for Celestron Vibration Suppression Pads. Designed them to be used on a table under 3D printer feets.
Celestron VS Pads have special type of material (not a silicon like in cheaper VS pads). This material is highly efficiently dampening vibrations, I used it many times with 8" SCT telescope because VS Pads are able to completely eliminate telescope shaking from nearby steps on concrete floor.
I used Celestron VSP for quite a while placed under Neptune Pro 3 printer feet placed on large wooden table. Without pads all printer vibrations can be noticed by placing hand on a table near printer foot. With VS pads large range of vibrations is dampened and almost nothing goes to the table, including noticeable cut of step motor noise transfer to the table. At some point I decided to minimize the size and also have the flat bottom surface of the pads frame.
3D model has 64mm inner diameter, which happened to be compatible with cheaper VSP alternatives (non Celestron), other pads inserts are made from silicone-like material, that is not as efficient but also helps to noticeably reduce vibrations. I only have 3 Celestron VSP and using one third party VSP insert that has same size (placed under front left foot).
Category: Gadgets