Automatic Gearbox oil dipstick for Renault VelSatis/Espace IV/Laguna 2/Avantime and others with SU1 Gearbox(Aw5550SN for Renault)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3D model of oil dipstick found in Renault 5 Gear Automatic Gearboxes.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 562
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since this dipstick is easily breakable(and mine broke) I modeled it!
Modeled using SolidWorks. Used photoshop for known dimensions and calculating rest.
Found some of the dimensions in a Russian forum: http://www.club-espace.ru/forums/index.php?/topic/11219-%D0%B0%D0%BA%D0%BF%D0%BF-espace-4-%D1%89%D1%83%D0%BF/&do=findComment&comment=206960
(many thanks to user cavari24)
Gearbox name: Aisin AW5550SN/AF33(SU1 for Renault)
WARNING! THIS IS NOT THE DIPSTICK FOUND ON VOLVO CARS OR SUCH!
I highly recommend printing the stick sideways with supports as its much harder to break.
Vertical model doesnt require any supports(Warning breaks easily!)
Print settings:
Layer height:0.2mm (could be 0.1 too but will be less durable)
Layer width:0.4mm (0.2 would be better but its harder to print)
Support: Yes(tree) for sideways model. None for vertical
Build plate adhesion type: None
Material: Petg/ABS/ASA(anything heat resistant) DO NOT PRINT WITH PLA OR YOU WONT BE ABLE TO TAKE MEASUREMENTS IN 75 DEGREES!
Infill:100%(recommended)
Walls:5
Top/bottom thickness: 1mm
I can model other dipsticks too if you send photos and dimensions of them!