simple electrical outlet cover for 2- and 3-prong outlets (NEMA 1-15 and 5-15)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a 2-piece electrical outlet cover, with options for 2- and 3-prong outlets; prints without support
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
design notes
I wanted a simple outlet cover to keep dust (and the desiccant I have now spilled twice) out of the power strip next to my desk, but I didn't find one I liked.
this outlet cover is designed to:
- print without support
- print in a strong orientation (to prevent the plug legs from breaking off in the outlet)
- cover NEMA 5-15 (3-prong) and 1-15 (2-prong) outlets
- be modular (the same plug insert works with cover bodies for 2- and 3- prong outlets)
- balance fitting securely with being easy to remove (the shape of the cover bodies is reasonably easy to grab, but doesn't take a lot of extra material, or stick out too far)
printing notes
the cover pieces are both designed to print without support with the small side down: the grip feature around the edges is 45°, so will print fine without support.
the plug insert prints with the prongs flat on the build plate. this orientation ensures that the layer lines are parallel to the plug insert legs, to minimize the risk of it breaking off.
the STL files are in the proper orientation to print; STEP files are included if you want to modify it for your own purpose
assembly
it prints in two parts: a cover body and a plug insert. choose the cover body that works for your situation. the plug insert will only go into the cover body one way, so if it doesn't fit flush, flip it over and try again.