1 / 4
Caldigit TS3 Plus under-desk holder (no screws in your table top) — zdjęcie 1
1 / 4

Caldigit TS3 Plus under-desk holder (no screws in your table top)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Yet another under-desk holder for a Caldigit TS3 Plus. This one is meant to hang on an under-desk cable tray.

Ocena
0 / 5
Polubienia
0
Pobrania
17
Wydruki
0
Wyświetlenia
369
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I designed this holder in a pinch. It is not the prettiest, but it is sturdy and fitting my needs. Namely:

  • Does not require drilling any holes in my tabletop
  • Hang on my under-desk cable tray (model I use)

Hardware

While the holder does not screw into your desk, it is made of various parts that needs to be assembled together. You need:

  • 6 x M3 nuts
  • 6 x M3 8mm hex screws

Instructions

  1. Print 2 x horizontal brace.stl 
  2. Print 1 x hook brace.stl
  3. Print 1 x right bracket.stl
  4. Print 1 x left bracket.stl
  5. Place M3 nuts in the 6 holes of the same shape. Take the left or right bracket and screw in the two horizontal braces. Carefully insert the dock and enclose it with the remaining bracket and horizontal braces. Finally attach the hook brace.
  6. Hang your dock under your desk!

Notes:

  • All STL files are already properly oriented and do not require supports
  • I suggest printing the brackets with PETG and the rest with PLA. Only the brackets will be in contact with the dock that gets warm.

Customization

Since this model may need adjustments, I included the Fusion360 file. The hook can be customized to your own needs by just updating the “hook” sketch.

Tagi