Stacking Block Toys
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Variety of stacking blocks that lock together. There are road pieces that fit matchbox-sized cars.
- Ocena
- 0 / 5
- Polubienia
- 112
- Pobrania
- 237
- Wydruki
- 0
- Wyświetlenia
- 2136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted something my 3 y.o. and I could build with, but didn't find anything that was easy to use yet allowed building of large structures. Now he is super excited whenever “3d printer wakes up and makes more blocks”!
These can all be printed without support and with reduced settings to save weight and material. They are still quite strong and robust with reduced settings, and look great with fancy filament!
Settings I use:
- 0.4mm nozzle
- 0.2mm layer height
- 1 perimeter
- 3 bottom layers
- 4 top layers
- 10% infill, triangles or grid
IMPORTANT: for parts that have pins, be sure to add a modifier that sets the pins to 100% infill. Or grab one of the pre-sliced .gcode files where this is already done!