Fuji Nevada 1.7 Cable Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for internally routed cables for a 2020 Fuji Nevada 1.7 mountain bike.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to hold internally routed cables in place and cover the entry port. It is angled so the cable is protected from the sharp edges of the port. It is sized for shift cable housing (4mm) but I included the F360 model so you can upsize for brake cables.
Printed in PETG for the flexibility, though I would not trust it to survive to many reinstallations. The cut is angled so it aligns with the center of the cable allowing a snug fit. I had to use a razor knife to carefully cut where the overhang sagged and bonded it closed.
It has held up through a few rough rides and one good crash. I have my derailleur routed on one side, and a dropper post cable on the other. Enjoy!