1 / 12
Magneto X FRONT FACING CPAP Duct (18mm) w/ BEACON Mount — zdjęcie 1
1 / 12

Magneto X FRONT FACING CPAP Duct (18mm) w/ BEACON Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magneto X FRONT FACING CPAP Duct (18mm) w/ BEACON Mount

Ocena
0 / 5
Polubienia
2
Pobrania
21
Wydruki
0
Wyświetlenia
236
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Remove one or both of your fans and install this CPAP fan duct that is rotated so the ducts face the front. Duct discharge nozzles and their placement are from Archetype Breakneck. For Medium and Long Meltzone Only (Does not accommodate the Short Meltzone). Beacon is 22mm inboard on X from the nozzle center to center. Center channel in the duct is perfect for Beacon cable routing. There is a spot for a ziptie to secure the cable too. 

Hardware needed: 

2x M3 x 5mm OD x 4mm LG heatset inserts

4x M3 x 25 BHCS

 

Tagi