BambuLab hotend Ender 3 fan duct MiniMe V4 remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mini-Me V4 remix to mount Bambu P1 hot end on an Ender 3 Pro with stock direct drive stepper and fans.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 160
- Wydruki
- 0
- Wyświetlenia
- 1533
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mini-Me V4 remix to mount Bambu P1 hot end on an Ender 3 Pro with stock direct drive stepper and fans.
This adapter is needed to fix the hot end to the fan duct.
I used stock Bambu P1S hotend assembly with thermistor and heater, but removed the little fan to use my stock Ender fan.
For Klipper configuration use “ sensor_type: Generic 3950 ” (Thanks to Squirrelf on Patreon) and “ max_temp: 300 ”.
I re-calibrated XY and Z offsets because of the new position of my CR-Touch sensor, but I would recommend it anyway.
Print Settings
Printer:
Bambu Lab P1S
Rafts:
No
**Supports:**
Yes
Resolution:
0.2
**Infill:**
100%
Filament: Qidi PAHT-CF Black
Notes:
The model is very thin, so 100% infill with 4 perimeters worked fine.
Used PAHT-CF for both strenght and vibrations/heat resistance, but can be used any ABS / ASA / similar.
I suggest printing with the fan plate facing down, as in photo.
I used tree supports only for critical areas and from the buildplate.
Category: 3D Printer Extruders