Ford Lightning EV Receiver Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 2inch receiver cover/cap for those that love the Ford Lightning EV
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 444
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After seeing a few receiver covers that were inspired by the Ford Lightning I decided to take a stab at it.
I modeled this cover so that it does have a little room to shift as needed.
This was printed in ABS on the Bambu P1S and I recommend a multi-color capable printer. Print with the face down on the print bed and having a textured plate helps reduce/eliminate lines.
I paired this with the following 3D printed Hitch Pin: https://www.thingiverse.com/thing:2222961 by PacketPaul.
Printer: Bambu Labs P1S
Layer Height: 0.2mm
Material: ABS/ASA/PETG Recommended