1 / 1
Printed 80t timing pulley - 6mm belt- using a GT2 20t timing pulley - 8mm or 5mm bore — zdjęcie 1

Printed 80t timing pulley - 6mm belt- using a GT2 20t timing pulley - 8mm or 5mm bore

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Inspired by the Voron gt2 80t idea Metal version is best, but this does work great as an temporary setup

Ocena
5 / 5
Polubienia
64
Pobrania
554
Wydruki
1
Wyświetlenia
2191
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This uses four m3x8 screws and a gt2 20teeth timing pulley with either 8mm or 5mm bore

The front "lip" of the gt2 20t pulley will pop off easily with pliers

make sure to keep pressing on the gt2 20t pulley while securing the screws.
 
I made this to use it on my belted ender mod: here

Tagi