Liczymy pasujące modele…
I created some stand to tilt the Edifier r1280t a bit. I looks much better now (i think) Please note that i made them a little to deep so a small edge showed at the front. I stuck a piece in to thicken the back a bit so the front edge…
This is a remix of thing:5158444 that I modify to suit my need the original design is working ok, but I want to simplified the 3D model.. I'm omitting the screw-assembly and opt for glue-assembly only, adjusted the locking-tab and notch…
Inspired by https://www.reddit.com/r/voroncorexy/comments/ajyzxb/new_80t_gears_details_in_the_comment/ HINT : Voron moved away from printed Z gears. This is only a makeshift alternative…
This uses four m3x8 screws and a gt2 20teeth timing pulley with either 8mm or 5mm bore The front "lip" of the gt2 20t pulley will pop off easily with pliers make sure to keep pressing on the gt2 20t pulley while securing the screws. I…
Garbage bins in 1:87 H0 scale. Designed after typical Swedish garbage bins in the 60th to 80th. Visit my blog at: Enely's 3D Print instructions Try both with and without support. The prints in the picture are printed without support. (Not…
Description PDF Inspired by https://www.reddit.com/r/voroncorexy/comments/ajyzxb/new_80t_gears_details_in_the_comment/ HINT : Voron moved away from printed Z gears. This is only a makeshift alternative…
A simple stand for the Edifier 1280T. I've uploaded both f3d and step files for changing it to your specs.
Tired of the noise and heat your RTX 3080ti Msi Ventus 3x is making? I designed this custom shroud to let you mount two 120mm fan directly on your gpu rad. I recommend you to undervolt your gpu with this mod to benefit of low noise level…
I used to have two 120mm fans attached with zip ties to my GTX1080, resulting in better temperatures while being quieter. I recently upgraded to a RTX3080ti and since I am an owner of a 3D printer by now I made a shroud to fit 3 120mm…
This is 80 teeth 6mm pulley used in voron 2.4 r2, a open source core xy 3d printer. It is used in z axis motion.
I make cute and exciting things 😊 Check out my cake toppers feel free to ask me to make a custom one of my current models 😊 my aim is to design easy and simple designs that don't take for ever to print single colour chase happy birthday…
I make cute and exciting things 😊 Check out my cake toppers feel free to ask me to make a custom one of my current models 😊 my aim is to design easy and simple designs that don't take for ever to print single colour chase happy birthday…
Gear Box Back to use common type 80T CNC pulley Let ERCF V2 use common type CNC metal 80T pulley There is nothing wrong with 3D printed plastic 80T pulley, instead, I think it's one of the most useful invention of the year, because 80T…
Customized version of http://www.thingiverse.com/thing:16627 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=16627 Instructions Using the following options: teeth = 80 m3_nut_depth = 2.7 idler_ht = 0…
Adapter for Asus Rog Strix GTX 1080TI graphics card. It allows the mounting of 120mm diameter fans. The .3mf file includes holes for fan screws and a properly trimmed model. The .stl file contains just the adapter model for custom…
WARNING It's static model, so it may doesn't fit some types of rails. You can make it fit by reengineering the bogies ENG: The VL80T (ВЛ80Т) This is N scale model of train "VL80T" It was used on USSR/CIS countries/Russian railroads. The…
A 10-inch, 2U rack mount for the Ugreen NASync DXP480T+ NAS. The all-flash NAS from Ugreen! My friend Maurício posted this on makerworld (ew) with my permission. Please don't report either of us! Follow and boost him so he can buy stuff.…
I don't use the remote control of the Edifier r1280t much but still didnt want to lose it. So i made a small holder to keep i attached with the speaker :-) Enjoy! Please DONATE if you like my stuff! Print instructions Category: Audio
A remix of @Czario_2210257 model for a "cleaner" look for my own preferences. Set Z-axis to 3.81mm before printing
16dp 14.5pa. 1/2 thick 5/8 bore. No keyway, 1/8" pin clearance and press fit
80 tooth 1.5 module spur gear. 35 mm bore diameter with circlip groove to retain a 11 mm wide bearing. Overall thickness of 19 mm. This is a replacement idler gear to drive the power feed / threading gearbox for an Enco 110-1351 lathe.…
This model pressure fits onto the end of a common style of Laptop charger, specifically the ADP-180TB H It also has a tab for wrapping the cable easier.
An updated version of my previous design. Easier printing , better finish of the front side, less support needed and stronger too. The previous version had some issues with deformation over time. I have this version for 2 years and with…
The GPS mount that came with the rekon 5 did not fit my GPS. So I designed my own for the Baitian BN-180T. It seems to hold quite well but in case you want it to be more secure you could add some double sided tape or wrap it with a zip…
4 leaf clover decoration for the 80th anniversary, infill 20%, printed in PETG
Remix Geared Z for 2020, 2gt-200, 80t, 20t, mgn12, nema17, F695-2RS.
This is an adapter for the MSI 1080ti ARMOR 11G that allows you to replace the loud and inefficient stock fans for some 120mm ones of your choice. Category: Electronics
My dryer stopped drying after four years. After cleaning it, I decided to do something about it so I wouldn't have to go through this again. I couldn't find anything interesting in the pre-made models, so I designed my own attachment for…
Magnetic remote holder for Edifier 1280T for easy storage on anything that a magnet can stick to. There already was another remote holder available on this site but I had other magnets laying around. Also, it's fun to reinvent the wheel.…
I have been looking at various random objects with our new microscope. I found that sometimes the items I want to look at are not suitable for mounting on slides (and we don't have any even if we wanted to mount some). So I decided to…
1/180th of the original scale. The bottom cavity will fit a model rocket engine if you want to 3D print and launch one!
This is a quick little remote holder for an Edifier R1280T because I got tired of losing the thing on my cluttered desk. Its uses one of the small clear command strips to adhere to the side of the speaker or where ever you would like to…
Easily add window screens to your louvered air vents to keep bugs out of your garden shed. Use PETG filament for outdoor use. No supports or brims. Print 2 frames. Apply outdoor rated 1" wide double stick tape to back side of frame. After…
This is a 0.8 MOD gear 80T for Sharpstar Askar FMA180 telescope. It is intended to be used with ZWO EAF stepper motor with 0.8MOD gear 40T for automatic focusing control. For EAF assembly (please refer to pictures for more details) ,…
10 inch rack mount for UGREEN NASync DXP480T network attached storage. I've added also the version without keystone adapter. Quite tight fit, printed with PLA but PETG would also do the trick. 0.2 mm layer height
Willy's 80th birthday plate This is not an accurate license plate, I created this to put on my spare wheel of my jeep. Would rather print in PETG if you plan to use in on the outside of your car.
Hey guys, this is my very first thing I created on my own. I hate it when my graphics card bend to the bottom because its too heavy. So I created this graphics card holder to hold it right in the way. This holder ist designed for the NZXT…
Summary I was not happy with the stock fans of my ASUS TUF 3080Ti. They are incredibly loud. I wanted to convert the cooler to use quieter 120mm fans. I also did not want to damage my GPU at all, so I designed this two part GPU shroud to…
This is my first published Model. GPU support for a EVGA 3080TI W/ a EK Vector water block in a Corsair 4000D Airflow, (yes my PC is dusty). STEP file provided to adjust the bracket to your needs. Print Orientation= Print this on its…
GTX 1080TI logo that goes on EKWB, covers up the internals Category: Computer
80th anniversary medal Medaile k 80. výročí školy
Willy's 80th birthday plate This is not an accurate license plate, I created this to put on my spare wheel of my jeep. Would rather print in PETG if you plan to use in on the outside of your car.
I make cute and exciting things 😊 Check out my cake toppers feel free to ask me to make a custom one of my current models 😊 my aim is to design easy and simple designs that don't take for ever to print single colour chase happy birthday…
A remix of @Czario_2210257 model for a "cleaner" look for my own preferences. Set Z-axis to 3.81mm before printing
This is a quick little remote holder for an Edifier R1280T because I got tired of losing the thing on my cluttered desk. Its uses one of the small clear command strips to adhere to the side of the speaker or where ever you would like to…
3D model of the Ukrainian Armed Forces emblem. It features a clear relief and is suitable as a souvenir, gift, or personal accessory. The model can be easily scaled to the desired size and printed in different colors depending on…
PCB cover for EK RTX Plexi Vector waterblocks Printed mine on Anycubic photon. Category: Computer
