GNSS GPS mount for Losi Mini B/Mini T 2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GNSS mount for Losi Mini B or Mini T 2.0. This places the GNSS module behind the transmission/rear suspension
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 312
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
GNSS mount for Losi Mini B or Mini T 2.0. This places the SkyRC or PowerHobby GNSS module behind the transmission/rear suspension. It also has a secondary effect as a wheelie bar, though there are no wheels and is not adjustable. Uses the 4 bolts that mount the transmission to the chassis. I recommend printing from TPU in order to get the GNSS unit in and out, as well as to resist breakage when crashing. The GNSS can be charged while inside of the printed mount. Happy speed running!
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1
No
Supports:
Yes
0.2
Infill:
100
Notes:
Print with supports only on the open sides to prevent sagging. Your settings and mileage may vary...
Category: R/C Vehicles