Toniebox figure - Guitar MMU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom toniebox figure - Guitar
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 336
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Alternative upper part with figure for Toniebox RFID mount ( https://www.printables.com/de/model/931388 )
I added an icon that can be used within custom.tonies.json in teddycloud / teddybench into other files. just rename the <model>.png.txt into <model>.png.
The guitar has to be glued into the mount as a horizontal printing causes a lot less filament swaps than vertical / degree printing.
Using SUSL “complete individual object” feature it is possible to highly lower the number of filament swaps - still I recommend printing this only with MMU.
I recommend loading it as model only into your slicer as my print settings are very specific :)