1 / 1
Spacer for drag chain, shifted backwards by 3mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drag chain shifted backwards by 3mm as there is contact with the housing. Should fit all carriage assemblies.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
two-stage spacer, drag chain is shifted backwards by 3mm
you need:
2x Standard M3 Heat Set Inserts (M3x4.6x5.7)
2x M3X6 SHCS
Use PETG / ABS / ASA or any other high temperature filament.