Raspberry Pi 4B 10-Inch Rack Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rack mount for two Raspberry Pi 4 model B, can be mounted to any 10-inch rack.
- Ocena
- 5 / 5
- Polubienia
- 113
- Pobrania
- 796
- Wydruki
- 2
- Wyświetlenia
- 6020
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
A 10-inch rack mount for two Raspberry Pi 4 model B. This model has two variants, one with OLED cutouts and one without them.
The OLEDs I used have the following measurements:
- Board: 25.2 x 26 mm
- OLED: 24.6 x 16.8 mm
I also suggest adding nuts between the OLED board and the printed model, to avoid breaking the fragile glass.
Do you like my models? Consider buying me a coffee ;)
Print Settings
Printer Brand:
Anycubic
Printer:
Custom Mega X
Rafts:
Doesn't Matter.
Supports:
If your bridging is right, no.
Resolution:
0.2 or 0.24
Infill:
20% should be enough
Filament:
I printed mine in PLA+, but PETG would've been better due to the heat.