Parrot Bebop 1 modular body
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parrot Bebop 1 3D printed drone
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 1030
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
INTRO:
I have completely redesigned the drone body, making two main changes :
The first is the addition of position lights on the sides to increase the drone's visibility.
The second is the inclusion of a modular system through threaded inserts, allowing the use of different antennas from the original ones or the attachment of future modules to the drone.
DESCRIPTION OF 3D PRINTED PARTS:
- Main body
- Support for motors, and position lights (Red left side, Green right side)
- There are two versions, one for stock Parrot antennas, and one to use with other antennas
- Landing feet
- Side SMA antenna support
MATERIAL:
- For main body, support of motors and antenna support I've used ABS-GF, but you can use other type of resistant material
- For landing feet: TPU (to better absorb impacts)
BOM:
All additional parts needed for the drone are mentioned in the PDF files below, there are two versions: one for stock antennas (BOM_stock.pdf) and one to use different antennas (BOM_NO_STOCK.pdf)