Briggs and Riley Bag Hanger for Smart Link
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This snaps into the Smart Link connection on Briggs and Riley suitcases and allows for a backpack or other strap.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 474
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This snaps into the Smart Link connection on Briggs and Riley suitcases and allows for a backpack strap or other luggage strap to grab onto, while using gravity to hold it down. Tested only on my Essential 22 inch carry on but I think the connection would work on any suitcase. Made snug so it doesn't fall out.
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu X1C
No
Supports:
Yes
.4mm
Infill:
15%
Notes:
Designed to print on the top flat surface with two small sections of supports. No supports should be needed on the curved side wall. I chose 4 walls and 15% gyroid infill but you could go higher or lower for whatever durability you want. Fuzzy skin looks best in person if printed on a textured plate. I used .5mm point distance and .2mm thickness for the fuzzy skin.
Category: Other