1 / 7
Briggs and Riley Bag Hanger for Smart Link — image 1
1 / 7

Briggs and Riley Bag Hanger for Smart Link

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This snaps into the Smart Link connection on Briggs and Riley suitcases and allows for a backpack or other strap.

Rating
0 / 5
Likes
3
Downloads
55
Makes
1
Views
474
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

This snaps into the Smart Link connection on Briggs and Riley suitcases and allows for a backpack strap or other luggage strap to grab onto, while using gravity to hold it down. Tested only on my Essential 22 inch carry on but I think the connection would work on any suitcase. Made snug so it doesn't fall out.

Print Settings

Printer Brand:

Bambulabs

Printer:

Bambu X1C

**Rafts:**

No

Supports:

Yes

**Resolution:**

.4mm

Infill:

15%

**Filament:** BambuLab PLA black

Notes:

Designed to print on the top flat surface with two small sections of supports. No supports should be needed on the curved side wall. I chose 4 walls and 15% gyroid infill but you could go higher or lower for whatever durability you want. Fuzzy skin looks best in person if printed on a textured plate. I used .5mm point distance and .2mm thickness for the fuzzy skin.

Category: Other

Tags