Lily58 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
High/Low profile Lily58 case
- Ocena
- 4,75 / 5
- Polubienia
- 144
- Pobrania
- 1823
- Wydruki
- 6
- Wyświetlenia
- 12 196
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
For the past year and a half, the Lily58 has been my trusted daily driver, delivering a gratifying typing experience. As the first mechanical keyboard I built, it holds a special place in my heart. However, most kits out there disappoint me, offering unappealing plates or acrylics that lack aesthetic charm. In addition, attaching rubber feet can result in glue offsetting, which can prove bothersome. Consequently, I sought something I could test and 3D print on my own, and I am proud to present the design I came up with! It is simple yet sophisticated, and I am delighted with the result.
I've included 2 versions of the case:
- High-profile for those cherry switches
- Low-profile for choc switches
Also, you'll need 5 M3 Countersunk of 3mm length for each case.
If you have any questions feel free to ping over on Discord! .joshs
Based of the original footprint from Kata0510's project
UPDATE 25/02/24
Added .STEP files for both top and bottom parts.
UPDATE 09/09/23
As requested, I added the pro-micro cover! This one can be attached using the M2 screws that comes with the OLED cover kit (standoff, screws, and acrylic cover).