Tic Tac Nano Terrarium
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
12/12 update: the moss seems to be alive and doing well Update: New staircase version A simple nano terrarium made…
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 83
- Wydruki
- 2
- Wyświetlenia
- 2102
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
12/12 update: the moss seems to be alive and doing well
Update: New staircase version
A simple nano terrarium made from a tic tac box.
You will need:
- Empty box of tic tacs
- Some moss
- Small plants
- Water
- Dirt
Activated Carbon Instructions:
- Cover the "mesh" in the 3d printed part with activated carbon.
- Add dirt above the activated carbon.
- Add moss and plants.
- Water with a small amount of water.
- Place in a area with indirect sunlight .f3d and .step files are available if you need to adjust the tolerances or modify the design.
Refer to images for additional instructions.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Doesn't Matter
Supports:
No
0.2mm
Infill:
15%
Filament:
Inland PLA + White
Notes:
Print at 0.2mm layer height and with a 0.4mm nozzle for best results. Refer to this article for more information on how to make your prints waterproof: https://www.bcn3d.com/waterproofing-3d-prints-5-solutions-to-creating-water-resistant-models/.
Category: Outdoor & Garden