1/10 Scale Miniature Aerogarden Harvest (With Removable Water Bowl)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very small Aerogarden with a removable water bowl and grow deck. STEP and f3d files are included if you wanted to…
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 73
- Wydruki
- 1
- Wyświetlenia
- 761
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
A very small Aerogarden with a removable water bowl and grow deck.
STEP and f3d files are included if you wanted to modify it
Can be printed with both Resin and Plastic.
See print settings and post printing for instructions.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Doesn't Matter
Supports:
Yes
0.12mm, 0.36mm extrusion width
Infill:
20%
Filament:
Various PLA Carbon Fiber/Generic White/Glow in the dark
Notes:
Print the parts with "(White)" in White filament, the parts in "(Color)" in a color of your choice, and "AG_Leds" can be printed in either white or glow in the dark filament.
Only the water bowl needs build plate supports.All of the other parts do not need support.
Orientations for all of the parts can be found in the pictures.
Tolerances for most parts are around 0.1mm
Post-Printing
You will need:
- Superglue
- Something to make the plants with (Ex: Construction Paper)
- Optional: Hot glue
- Superglue "AG_Leds" to the indent in "AG_Top"
- Superglue the the result to the top of "AG_Base". Make sure to align them well. This step can be a bit finicky.
- make and insert plants into the holes in "AG_Deck".
3a. Optional: Hot glue the bottom of the plants so they stay in place. - Insert "AG_Deck" into "AG_Water_Bowl". Make sure that the trapazoid indent is facing up.
- Insert the result into "AG_Base".
Category: Model Furniture