Parametric print in place container with a snap lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick container I made for storing vegetable seeds.
- Ocena
- 4,5 / 5
- Polubienia
- 29
- Pobrania
- 184
- Wydruki
- 3
- Wyświetlenia
- 1004
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Use PETG for this print. PLA might not be flexible enough and the hinge might snap.
I've printed it in Prusament PETG with the default “0.25 mm DRAFT” setting on Prusa Mini+ (attached).
First few open/close need a bit of force but then it's pretty easy.
Update:
Added openscad file with customizable radius/height params and a bunch of different radius/height stl files (check the file names).
I've only tested the 1cm radius by 2cm length. There might be bridging required for a bigger radius.
Update 2:
After the first update the lid wouldn't close too well. Fixed.
Also tested a 1 inch radius with 2 inch height. It's not pretty but works. There's some bridging issues but it stays closed and can hold stuff, so yeah…
The OpenSCAD file needs the excellent BOSL2 library installed. See setup instructions here.