Parametric print in place container with a snap lid
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.32 – €0.39 net (excluding VAT)
For file: seedcup_0.25mm_PETG_MINI_23m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.36 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 23.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Quick container I made for storing vegetable seeds.
- Rating
- 4.5 / 5
- Likes
- 29
- Downloads
- 184
- Makes
- 3
- Views
- 1,004
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Use PETG for this print. PLA might not be flexible enough and the hinge might snap.
I've printed it in Prusament PETG with the default “0.25 mm DRAFT” setting on Prusa Mini+ (attached).
First few open/close need a bit of force but then it's pretty easy.
Update:
Added openscad file with customizable radius/height params and a bunch of different radius/height stl files (check the file names).
I've only tested the 1cm radius by 2cm length. There might be bridging required for a bigger radius.
Update 2:
After the first update the lid wouldn't close too well. Fixed.
Also tested a 1 inch radius with 2 inch height. It's not pretty but works. There's some bridging issues but it stays closed and can hold stuff, so yeah…
The OpenSCAD file needs the excellent BOSL2 library installed. See setup instructions here.