Counting matching models…
The .f3d file can be edited in Fusion360 like so: Notes: The original sketch was not fully constrained. I didn't go back and add all the missing constraints, so major changes in hole sizes may cause strange behaviour. I didn't remove the…
Remix of original model to allow more / less hooks, diferrent spacing, etc.
Editable Fusion 360 file. Contains parameters with descriptions in Spanish. Heights, thickness, etc. can be adjusted. It contains a box on the back which is also adjustable.
This piece can be inserted in a rain pipe to fill a rain barrel on the side. If that barrel is full the water continues to go vertically down the pipe. This model is made for a DN75 (outer diameter 75mm) pipe, but there are parameters in…
Overview This is a modular snap-fit connector designed specifically for 3D printed parts and CAD workflows . The main goal of this model is to provide a ready-to-use connector that you can directly import into your own designs, without…
This model is ideologically based on the line Crochet tension ring Crochet Ring Crochet Ring (parameterized) New ideas have been incorporated into the model and the result feels significantly different. Printing recommendations:…
This thing has been designed in OpenSCAD in order to replace a broken mounting bracket for a kitchen light. I am supplying one example .stl file and the original .scad file, that you can use to adjust the bracket to your needs. I had the…
Adapter between various EU, UK, US electrical wall box sizes and shapes. There are some adapters out there for specific dimensions, but this one is designed to cover most cases via parameters. It's designed in Fusion 360 so you would need…
Simple small coil for storing LED strips. No glue. Simple lock. D165 - wired 5M D130 - common strip 5M
You can change any dimensions via Fusion 360 user parameters to fit any existing drill model. If you don't have fusion 360 please contact me with your drill dimensions so I can change the model to fit these drills as well. All comments…
Vacuum cleaner hose adapter for the locking Festool vacuum port found on the latest TS55 REBQ for instance. There's another thing designed by Steven0110g (thing 2199693), but his design inserts inside the vacuum port and therefore reduces…
This is a quick solution to make some use of the space above an IKEA SKADIS board. No need for supports. Source file/model (openSCAD) also provides printable dowels to connect in series. ! Disclaimer: The provided openSCAD file is for…
I designed this cover to use in my garden. In this design you can easily change parameters to yours and send it to your 3D printer. _________________________________________________________________________ You can find the cover for the…
This is a small 3-piece coffin model which can serve as a hiding place for a (jumping) spider. The lid is held on by 4 6x3mm neodymium magnets. These get embedded during the print (make sure you pause the print at the right time). I also…
This is a parametrized KeyMod Picatinny rail designed to be printed diagonally for best strength, that I've designed for mounting my bipod to a handguard. It uses chinesium KeyMod screw set bought on AliExpress. Following dimensions are…
A hook you can tie to a rope and use to secure things. To edit the parameters, open in FreeCAD and edit the spreadsheet. Printed on a Creality Ender 3 v2 in PLA.
A print in place mechanism for holding sticks. Fusion file with parameters to follow. Current model has a stick diameter of 20mm and height of 25 aswell as two screw holes 5mm diameter. Printed in Petg with 0.2. To modify download the…
Small bookmarks that helps me keep track of current day in my journal. Also can be used to mark entire lines. You can change variables in scad file and get unique bookmark that fits yours needs best. Printed with Creality Ender 3v3se,…
Filament Spool Divider If you have many filament spools in your storage and each of them has small amount of filament remaining on it, this model saves your storage space a lot. (Well, I'm preparing for publishing filament rewinder…
The .f3d file can be edited in Fusion360 like so: Notes: The original sketch was not fully constrained. I didn't go back and add all the missing constraints, so major changes in hole sizes may cause strange behaviour. I didn't remove the…
I paramatrized this model to make it fully accessible to all round spice containers, preferences and printer clearances. As uploaded it is meant to fit for empty Barilla Pesto glasses which I used. To modify it for you own needs you just…
A Fusion 360 model for making customizable round mold forms. I've also included a 120mm round mold form.
This is a simple frame to hang some pictures in a string in the wall, I have it in my daughter's room with some color strings and it looks quite nice, I'm printing more frames in more colors since she has like 30 pictures there. It is…
It's a horn that could be mounted on a harness on a hobby-horse, mounted by a screw though a hole in the harness. It contains 3 different horn sizes, as seen on the picture but by modifying the supplied *.scad file in OpenSCAD, you can…
Remix of original model to allow more / less hooks, diferrent spacing, etc.
A wall mounted device holder with device width and thickness specified. Thickness, holder height and back height can also be changed. Keep the wall thickness above 3mm to avoid problems. Original intent was to design a phone holder that…
Had the need for an adapter for moving some switches from the wall to a cabinet. Used Antigravity to create it. OpenScad source attached.
I like design of Farrukh. It was boring for me and I have drawn this case in OpenSCAD. With little modification. Also I made version with side fix. Дело было вечером, делать было нечего. Понравился дизайн, нужно было апельсинку к принтеру…
Editable Fusion 360 file. Contains parameters with descriptions in Spanish. Heights, thickness, etc. can be adjusted. It contains a box on the back which is also adjustable.
Same steps as original, just modified to be parametrized using fusion 360. Just Open it in fusion 360, in the solid tab pick the upper MODIFY menu, and select change parameters and then modify as needed.
This piece can be inserted in a rain pipe to fill a rain barrel on the side. If that barrel is full the water continues to go vertically down the pipe. This model is made for a DN75 (outer diameter 75mm) pipe, but there are parameters in…
Overview This is a modular snap-fit connector designed specifically for 3D printed parts and CAD workflows . The main goal of this model is to provide a ready-to-use connector that you can directly import into your own designs, without…
Premium Twin-Tray Deck Box (No Hardware / Support-Free) Looking for a sleek, premium deck box without the hassle of magnets or glue? This fully 3D-printable, side-loading deck box features a unique Twin-Tray system (one tray for cards,…
A customizable small form factor shield for PCIe cards. Designed for m2.5 threaded inserts. Print with supports. I had to do some conversion to get the f3d file to upload since Autodesk changed the format, but it seems to work. Let me…
I was inspired by SergeBakharev's mount. I needed one with a bump for the VESA mount indent in my monitor. Decided to parametrize it as each monitor might have different screw sizes. The LiftPod mounting arms have the same spacing as in…
Have you ever had cable all around? with this parametrizable cable organizer you can print whatever size you need. It is also possible to print it in a non symmetic way so that it could be stackable
It's a more advanced crystal generator, based on Teevax and Ferjerez's generator versions. You can now adjust the count of generated crystals, their sides count, their length and proportions. You can also adjust the base. There's only an…
I saw a video about this concept of making rotors that shall be relatively quiet. I have a quite cheap fan (20cm) and made a new rotor for it. You can change anything form the number of blades to the diameter of the axis etc. The stl file…
Parametrized Tea Bag Holder that can be Wall or Under Shelf Mounted. There are multiple ways to mount the tea bag holder: Using 2 wood screws to mount flat against a wall or door. Using 2 wood screws to mount the top to the underside of a…
This OpenSCAD 3D object generates a measuring scoop in STL format. Parameters : Scoop volume (milliliters); Handle thickness, width and length; The thickness of the scoop; The hole size and border The text, text size, policy,…
I had cables of different diameters coming out of an electronics box that needed securing and this is the simplest solution I could think of. You can easily customize it to fit your needs. The Fusion 360 model is parametrized: each cable…
This Openscad 3D object generates a measuring scoop. Simply modify the scoop volume (given in milliliters) in the Openscad file and generate the STL file. You will end up with a measuring scoop of the given volume. Other parameters can be…
Update: I'm uploading pre-configured backplates and hooks so you can mix, match and print what you need without messing with the model in Fusion :) Pick one plate with the required space between the hooks. The dxx in the plate file name…
I did it for my Tracer HD WEB008 but parameters allows to adjust dimensions according to your needs.
Can be just printed as it is and set together in the middle. Printing needs support on bed. Print the outer parts of the spool facing towards the print bed. Can be customized to fit your weaving shuttle by changing the parameters in the…
A parametrized 3D photo Frame in OpenSCAD. Easily adjust the frame size, thickness, depth, and photo inset. Parameters nominal_dimensions sets the photo size. front_depth sets the thickness of the frame in front of the photo. A high value…
You can adjust the openscad model to your size needs.
For some reason the caps of our hot sauce bottles keep breaking, so I printed new ones. I made the script parametrized so if I ever need a different kind of cap I can just put in the parameters and it should work. Printed in PLA at 0.1mm…
MTG Commander Deck Box 100+ sleeved cards. Default inner dimensions are: width 70, depth 65, height 93 mm but all can be adjusted. Parametrized Fusion360 file for easy adjustment included. MTG deck box for 100+ sleeved cards. Heavily…
Customizable OpenSCAD version of the Honeycomb Storage Wall that allows custom grid sizes and the ability to add walls. You may need to play with the rows/columns to get the correct amount since the angled top wall will cut off part of…
Here is a model I created on my free time. It can be printed in place but you will need to "Merge" the Tube and PlugHolder, align the hinge and elevate a little bit the Tube part. I'm also attaching the f3d file.
I made this cover because I can't find any for my pipe in store. In this design you can easily change a lot of parameters and send it to your 3D printer. _________________________________________________________________________ You can…
Simple zip tie anchor, the dimensions are in the attached image. I would attach it with 2 pieces of 10mm double sided tape. There's also the original Fusion360 file where parameters can be adjusted easily (google "fusion 360 change user…
The bracket in SLA file has some arbitrary dimensions I have used for one of the power bricks I wanted to mount from the bottom of my desk. Mounting is done using self-tapping screw. Adjust dimensions according to the size of your own in…
Parameterized lube station for your mechanical keyboard switches or a simple switch display plate if you choose the cutout size to exactly fit Cherry style switches (14x14mm). How to print Orientation: Face down (no supports) Perimeters:…
The awseome cool thing in the openscad model is the ability to place the screw holes on an angle you need. In this case the screw holes have not been evenly spread, but on strange angles.
Simple FreeCAD file to generate glue-on tube holders for spraycans. Parameters in the Parameter -Object ( DynamicData ) are: Parameter name Explanation CanDiameter Diameter of the spray can StrawDiameter Diameter of the holes for the…
This is a simple openscad model of a washer for any screw size you need. Simply modify the dimensions to your needs. The cost of printing is close to zero and the time to warm-up is most likely the longest part. The worth of being the…
I've wanted to print bigger sample box than Kaksu3D (only for 30), EngMike remix is too big for Prusa MK3.9 (50) so I've created in Fusion360 parametrized version to utilize maximum of my printer build plate Parameters that I've used for…
Simple pipe benders for short radius bends up to 90 deg. Print with at least 3 perimeters for strength and high infill . Radius and diameter is marked on the blocks. Hold in vice firmly ensuring straight section and clamp block are fully…
Remixed from Shaun's original which used 6mm BB ammo. This one was designed bigger, with 10mm ball bearings and 320mm diameter. This design is for the track. You need to provide the spherical bits that make this work – either 6mm BB ammo,…
Introduction Inspired by Alex Chappel's “Stackable Assortment Box Collection”, which you can find at alch.shop btw. I didn't like the bump at the top of the boxes, as I wanted to have just straight walls. Also I have absolutely no need…
This model is ideologically based on the line Crochet tension ring Crochet Ring Crochet Ring (parameterized) New ideas have been incorporated into the model and the result feels significantly different. Printing recommendations:…
Printing recommendations: Nothing special here but I recommend a concentric top and bottom fill pattern. Check the provided .3mf file. Parametrization I exported the basic size series as stl files. However, the strongest part of the…
Define width/height/depth in OpenSCAD file as necessary. You can also set the diameter of holes for insects and increment of the size for each row (can be set to 0 to have all holes with same size) The design will auto-fill the hotel with…
There are several pre-generated variants with reasonable parameters you can just use. Or you can use the OpenSCAD source to generate your own variant by simply altering the parameters. The important parameters: number of slots for lab…
A very strong clamp for a custom ⦰ rod. ⦰5mm and ⦰1cm version are already uploaded. Different rod diameters can be done with the fully parametrized Fusion 360 file The clamp is designed to be remixed and to attach different things to it.…
Different sizes of supports and forms for plants that uses a ⦰1cm rod. The clamp system and the opening in the front allows to easily install the support to the plant. The clamps are designed to be stackable. This allows to have multiple…
Entirely reparametrized the original .STL file by @Mikester for the top part (card-wallet-top.stl) to get a proper NURBS geometry editable .STEP file . Closed the viewing hole to create a blank surface for further personalized REMIXES.
Below link will open on https://jscad.app with the model: jscad.app link I placed ten 1mm radius spheres at the corners of the model and then used (static) hull(…geometries) → {geom2|geom3} to get balcony handle with nice rounded edges in…
Description This parameterized case, designed in Fusion 360, is a versatile and multifunctional storage solution. The dimensions of the case can be easily adjusted to meet your needs, making it suitable for various uses. Whether you need…
