ICR Compression Ring for Bicycle Headset | ZTTO Compatible | Inner cable routing | Parametrized
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom ICR headset compression ring: 28.6mm steerer, 40mm bearing, ~44mm OD. PA12-CF, 80% infill.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
ICR Compression Ring for Bicycle Headset
A split compression ring designed for an integrated cable routing (ICR) bicycle headset. The ring is installed between the upper headset bearing and the fork steerer tube and is used to properly center the steerer and distribute the headset preload.
Inner diameter: 28.6 mm
Bearing interface: 40 mm ID
Outer diameter: approximately 44 mm
Split-ring design for easy installation
Integrated cable-routing openings
Ring height: 5 mm
Above the bearing: ~1 - 1.2 mm
Intended for a 1-1/8" (28.6 mm) fork steerer
Recommended material for FDM: PA12-CF, PA12-GF or similar.
Recommended print: 80% infill, 8–10 perimeters, 0.15 mm layer height.