Counting matching models…
MODEL DETAILS Please refer to this upgrade guide . Prusa Mini+ upgrade featuring the E3D RapidChange Revo Micro Update: Check out our new Revo Prusa Mini Edition kit for a simplified upgrade - No firmware changes are required to complete…
Print approx. €1.46–€1.78 excl. taxPreliminary estimate for PETGSource material: PET
BACKGROUND: The QMX , (tr)uSDX and Elecraft KX2 and KX3 are fantastic portable radios, but the microphone for the KX2/KX3 is relatively big and heavy, and there really is no good mic option for the (tr)uSDX. So, I decided to design one.…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
MODEL DETAILS Edition 2, which uses the original Prusa Mini fan can be found here . If using this version (Edition 1), please read this upgrade guide before printing the parts: Prusa Mini+ upgrade featuring the E3D RapidChange Revo Micro…
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for PETGSource material: PET
Parts are optimized for ease print.The main body was pre-supported. If you want to make your own supports, a file without them is included. Keep the orientation of the parts as original STL file! The whole model is bolted together with…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Updated the hole size and made the back feet more firm. Also named all components in the .3mf file to make things easier. This is the kind of toy I would fidget with when I was a kid. A little Transformers Micro-cassette. While it does…
Print approx. €5.36–€6.55 excl. taxPreliminary estimate for one variant
EDC Micro Series. Compatible with each other. See also: EDC Micro Knife - Keychain (Scalpel) EDC Micro Screwdriver EDC Micro Tools I EDC Micro Tools II EDC Series Box Continuation of the series. EDC Micro. The same capsule or twice as…
* Disclaimer : my full spectrum grow led strips is still in transit. I used a regular led strip for the demo, but it is not recommended * Details This microgreens farm is compatible with 5"x5" grow pads or Agar Agar gel. The seeds tray…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
This is a simple block for storing SD cards and flash drives. Printed mine with an 0.4 nozzle and 0.2 layer height. If you print the model upside-down (with the holes on the bottom) you'll get some really perfect holes and a smooth…
Print approx. €5.67–€6.93 excl. taxPreliminary estimate for one variant
Introducing the simple microSD Holder, a sleek and functional design that is perfect for keeping your microSD cards organized and protected. This 3D printable model is designed to hold up to 18 microSD cards, making it perfect for…
I wanted to mount my DSLR to an old Olympus VMT microscope. Found a fitting camera attachment (on ThingiVerse) and made a remix with a fitting cylinder for the microscope. Also made one for a cheap Bresser Microscope (but it doesn't…
Print approx. €2.31–€2.83 excl. taxPreliminary estimate for one variant
3D print your own Transmission Electron Microscope (TEM) ! This model is designed for FDM printing, but probably works okay on SLA printers with some smart placement on the buildplate. ✨ Features : The microscope column opens up to reveal…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Introduction This is a good mechanical mount for the SG90 180 degree plastic micro servo. It is simple to assemble and print!! It can be useful for building your own robot or for some Arduino project!! I offer two model variants, one with…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Parts: Water reservoir Sprouting tray Weighing plate Lid Divider I'd recommend to use PETG for at least the reservoir to make it watertight. For slicing the sprouting tray you have to use PrusaSlicer, because the grid at the bottom is…
I couldn't find the full train set on Printables.com, so I thought I would upload it in case anyone wanted the full thing, but didn't want to use 3D Builder . Photo is taken from the above link, I am still printing my set.
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Always annoyed by commercial SEM stub holder for four stubs, while I can have five samples in one run. So I decided to design an holder for five SEM stubs (standard stub with a diameter of 3.2mm) The cover fits perfectly on top of it, but…
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for one variant
This is a remix of the original RØDE NT USB mount by ozykisser. This design offers the best stability due to the double bracket and the radii to avoid mechanical stress peaks. Nonetheless, the original design is not usable for FDM due to…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for PETGSource material: PET
Remixed The Mystery Machine van with cool tooned look. Parts are optimized for supportless print.(However, if you have problem with fenders use a support enforcer.) Keep the orientation of the parts as shown on the picture! The whole…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
Microscope arms are expensive. What isn't expensive are the multitude of vesa monitor mounts available. I wanted to use a vesa compatible gas spring arm for my Eakins digital microscope. I also wanted the ability to use standard…
Print approx. €2.32–€2.83 excl. taxPreliminary estimate for one variant
Replacement Keyboard Foot for Microsoft Natural Ergonomic 4000 Keyboard ( KU - 0462) . I had an old computer which I refurbished to donate. Used my printer to replace the broken feet of the keyboard with a designed new one, because I…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Inspired by the recent push by Prusa research to design and manufacture useful items in the fight against coronavirus, I thought I would share some items I designed and use regularly for research in my lab. This was designed so that it…
Print approx. €3.55–€4.34 excl. taxPreliminary estimate for PETGSource material: PET
flat in-view rotating XY table for microscope SMD assembly and inspection Just 26 mm high but featuring 2 axis plus rotation. Use either stick for rotation around center axis. Twist the sticks to move the XY table with gear-reduced…
Print approx. €3.76–€4.59 excl. taxPreliminary estimate for one variant
In education you often had to clean a lot of microscope slides after a lesson. So its good using a dishwasher for that. A holder for 30 slides make it easier. USE PETG, because the temperature in a dishwasher is higher than 60°C!
Print approx. €4.23–€5.17 excl. taxPreliminary estimate for PETGSource material: PET
This is a remixed project of the Mitutoyo Micrometer Battery Cover by GreatOldOne . After printing the original design by GreatOldOne, to replace a broken Battery Cover for our 1-2” Mitutoyo Mic. I noticed that the fit was not as I…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Feeling nostalgic about Microsoft Office from early 2000s? Download and print this keychains for you or give to your coworker, friends and family! Info: Microsoft Office 2000 (version 9.0) is a release of Microsoft Office, an office suite…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
This prints as oriented. Max bridge length is ~10.5mm, and the tolerances include this bridging. Sheath is just the right kind of snug! the orange one has a bit of holofoil laminate on it 😎
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Holds five microscope slides at the same time to stain them in Coplin Staining Jars. Created interchangeable handle
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for one variant
There are great tripod screw mounts for cameras. There are interesting solutions for having overhead camera mounts for youtubers and twitch users. So let's use these solutions to free up space for soldering with the Andonstar microscope.…
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
Here is a small pop filter for a Shure SM58 type microphone. --- It's probably not the best sounding one but it does the job, it's small, quick to print, easy to realise and in one piece. Update => The empty round version offers better…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Buy attaching a cheap $15 microscope to your phone, you can take amazing microscopic images and videos and share what you see with those around you. This attachment prints with no supports in two pieces which are then glued together. Once…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
🔫 Introducing the Bump Stock Extension for Micro Roni Gen4 by Veracon Engineering! Enhance the stability and control of your Micro Roni Gen4 with our custom-designed Bump Stock Extension. Engineered for precision and compatibility, this…
Print approx. €3.26–€3.99 excl. taxPreliminary estimate for one variant
I wanted to make a soldering microscope that is freely positionable over the work. So I modded my generic digital microscope with 35 mm tube. You need 2x(M4 nuts and bolts) and might use some washers for ideal spacing. Please print with…
Print approx. €1.69–€2.06 excl. taxPreliminary estimate for PETGSource material: PET
The main reason I made this for is the Nextbase dash cam, from which it is very hard to eject the card if you don't have long nails. It also features a cable hook to attach it to a nearby cable so you don't lose it.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
This is an adapter to allow for mounting 80mm 25mm thick fans on the rear of a super micro 846 4u case. I lost my pieces so I designed this to let me mount standard fans.
Print approx. €2.03–€2.49 excl. taxPreliminary estimate for one variant
This requires a multi-material printer. Please refer to the included gcode and PrusaSlicer 3mf project file for a reference for how to print the checkerboard pattern. Microchess is a Chess variant invented by Glimne in 1997. It uses a…
Print approx. €4.23–€5.17 excl. taxPreliminary estimate for one variant
This 3D case is designed to securely house the Microchip Snap PG164100 Programmer. It ensures protection against physical damage while maintaining full functionality and easy access to all ports and connectors.
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Gcode included for PLA 0.4mm. If you print correct way up no supports needed.
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Designed this LED light to slide into the phone illumination module for the GALILEO Modular Microscope. All of the parts were printed in Hatchbox PLA with the exception of the strain relief grommet which is PETG. Note that the grommet…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
I sometimes have to analyze small parts for my work, and due to the pandemic caused “work from home” situation, I don't have access to the digital microscope in the office. At least I have an analog microscope at home, but I was not able…
Print approx. €5.54–€6.77 excl. taxPreliminary estimate for PETGSource material: PET
To put the ring back in place, you will need to unscrew the grill, put the ring back in place, and screw the grill back in place. I stuck colored labels on the console with double-sided tape. Category: Gadgets
Print approx. €1.22–€1.50 excl. taxPreliminary estimate for one variant
The Microsoft LifeCam Cinema Camera Mount is a great option for those looking to monitor their 3D prints. This camera mount is designed to work with the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 by Sneaks , providing a…
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
Simple stand for computer peripheral. 10x USB Type A 7x SD Card/MicroSD Adaptor 5x Micro SD Card
Print approx. €3.38–€4.14 excl. taxPreliminary estimate for one variant
DanAndersen remixed Arie Kanarie design for this fantastic mount but I'm already using a VESA adapter for the microscope and wanted to use the flexible LED lights with my metal soldering station. I added a few more steps to his Fusion…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
Tiny but tough - keeps spools in place. Not meant to roll. Made for Prusament 1kg rolls so you may need a wider version.
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant
This is for the the Steinberg The inner width is 160mm the height is 50mm perimeter:2 infill:15% There are holes for screws to mount it - which i did and would recommed. Normally i use double sided tape - which has sometimes problems…
Print approx. €9.09–€11.11 excl. taxPreliminary estimate for PETGSource material: PET
This is a remake of As-seen-on-TV item, called Dust Daddy. In principle, it's just some straws and adapter. Straws should be purchased separately from the store. This version uses 9 of them, and they just friction-fit into the holes.
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for one variant
This is a MTR3B radio case. In addition to use as a case, it can be flipped around and coupled with my micro-clipboard for handheld operation of the radio and a morse paddle while also being to log onto a piece of paper. The case is sized…
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for PETGSource material: PET
Color filters for microscope. Easy printing within one hour. Can be used as a light diffuser. Use transparent filaments to print the color filter. If you want a more pronounced color or light scattering adjustment, scale the Z axis (0.2 -…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
Adapter to use the Kreg KMS7215 Micro-Adjuster with a POWERTEC 71536 Router Table Fence: 1 ¼-20 nut needed: the print is interrupted at 10mm to insert it. Connect the adapter to the fence first, at the left handle, then screw the…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
The Planet Bike MicroMite 2.0 mini bike pump comes with a mounting bracket to hold the pump alongside a water bottle, but it only works to hold the bike pump off to the side of the bike. If you want to carry your pump in-line with the…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
This is an eyepiece lens cap for an Opticron 8x42 BGA monocular. The rubber cap supplied with this monocular is very easy to knock off or misplace as it sticks out from the body of the monocular and has no retention mechanism; this print…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
Both of us have a Quad Lock case on our phone. And this way we can both charge our phone when using GPS The print needs a little polishing after printing it since i didnt want to have a flat face to print it upon. Also recommended to…
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
Rueda para plato de horno microondas marca whirlpool
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
A minimalist pen holder for 7 Sakura Pigma Micron pens , designed for clean looks and efficient printing. Optimised for 0.6 mm nozzle with single-wall extrusion for a light yet rigid design. Works perfectly with a 0.4 mm nozzle if you add…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
The Leica M320 surgical microscope is state-of-the-art technology. Nevertheless, hazards can arise during operation.
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant
I need to take OD from bacterial cultures grown on microplates, but with the available black microplate adapter for my Tristar2 Multimode Reader LB942 the leads of the plates were always scratched and measurements were not reliable.…
A connector cover for Tidradio H8. When use an external microphone, the original cover is bad, so i design this custom cover, works well with the original screw. I print in TPU and PLA, all other material should works. In files section…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
1S Li-ion charger Universal charger 1S Li-Ion. You can use alligator clips, a DC connector, or whatever you need. BOM: 1S li-ion charger based on TP4056 DC cable DC jack Alligator clips 2x M3 screw 2x M3 heat inserts Basic specifications…
I glued the ventilation grid parts together, but that is probably not necessary. The fasteners for the frame uses the predrilled shelf attachment holes in the IKEA cabinet. I've added double 1 cm x 2mm magnets to the fasteners and the…
Print approx. €4.51–€5.52 excl. taxPreliminary estimate for PETGSource material: PET
I own two of Microsoft Wireless Mobile Mouse 4000, and the rubber coating on the scroll wheel has gradually worn and come off on both mice. I have designed a replacement part. I have printed it with TPU, and it fits well without need for…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
These are fixes for the plastic parts that hold the handle. It is compatible with the Frigidaire Gallery series model FMT148GPB1, I'm not sure about any other. I've also included a larger bottom part (our microwave door's whole corner was…
I lost battery cover for my Microlife (BP A2 Classic) tonometer and i made new one. / Ztratil jsem kryt baterií u mého tonometru Microlife (BP A2 Classic) tak sem si vytvořil náhradní. Material - PETG white 3DFox Layer 0.2mm Print…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
Designed this bracket to lift the STM preamplifier up on the ScientaOmicron VT-AFM XA. Both reducing strain on the cable and keeping it safe from being knocked around.
Print approx. €5.91–€7.22 excl. taxPreliminary estimate for one variant
Die Muskatreibe wird passgenau mit originaler Schutzhülle in den Aufbewahrungszylinder gesteckt+ Muskatnuss Aufbewahrung mit gut schließendem Deckel. Das ganze in PETG.
Print approx. €3.27–€4.00 excl. taxPreliminary estimate for PETGSource material: PET
"BeamDream" is the first fully 3D‑printed illumination system mod that unlocks pseudo‑DIC, darkfield, oblique, and gradient contrast modes in standard microscopes with no additional optics required.
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Instruction Simply take the two blocks align to the microfiber and cut to the same rectangle size. Wrap the microfiber around the edge and crimp it down. Updates March 23, 2024 Added an alternative knob for thin cloth or sandpaper.…
(Yet Another) SD/microSD card case with the rough XY dimensions of a credit card or Raspberry Pi Print instructions Added a tray with 1 SD and 7 microSD slots. It's not as well-tested as the 2SD/5uSD tray; the uSD slots might be tighter.…
In order to find the perfect fit for your setup, just print a bunch of these with different scaling in Y/X-direction (+/- 10 %). MicroMax Standard The card is recessed by 6 mm and will fit every typical card slot. I tested these with my…
A box/holder for your SD cards! It holds up to 12 microSD cards and 3 full-size SD cards. It also has an integrated lid connected via a print-in-place linkage, which latches securely shut to ensure your SD cards won't fall out on the go.…
Remix from the awesome print in place "Hinged Sd & Micro SD Card Box - 16 Slots - All In One Piece by 8u9o" https://www.thingiverse.com/thing:3611322 Print Settings Printer brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution:…
Holds: 10 MicroSD Cards 6 Standard SD Cards 6 USB(A) Memory Sticks
This is a micro-SD card holder for 18 micro-SD cards. A save place for a lot of data ;-) It is a smaller version of my popular SD-card holder: https://www.printables.com/model/69096-sd-card-case After printing you should screw the jar and…
Holder for Micro SD Card Holders. The last edition relied on a friction fit which led to issues on other printers. This time I have completely redesigned the model from the ground up to use springs instead. This means that the tolerances…
3D Model made for CAD. STEP/STP and STL provided. Model completely designed by me.
I liked the remix from ANBAL534 ( https://www.printables.com/model/207028-steam-deck-carrying-case-insert-for-eu-plugs-europ) but missed the option to use the case as a stand as well. Besides that I don't use full SD cards, I opted in…
I was looking for a place to store my micro SD cards + adapter and came across the design of "bgill". Unfortunately only for micro sd cards without adapter. So I made a remix based on bgill's design.…
UPDATE: Requested new variant added (SD Card Slide Holder 5X1+SIM) with SIM removal tool and SIM card adapter. This Micro SD card / SD card holder holds a multitude of cards in a thin light and secure package, with a small detent that…
Elevate your recording and gaming setup with my Customizable 3D printable microphone arm with adjustable joints and easy assembly for improved gaming and audio setups. Adjustable The joints can be adjusted in 10 degree intervals where…
Micro Disc Shooter This is a travel prefect, print-in-place micro disc shooter. It measures about 5 × 3 cm (2 × 1.2 in). With the disc clipped in place, it slips easily into your bag—always ready for a quick game or a fun challenge. How…
Designed with the support and contributions of the “Recreator 3D” Discord community. This design uses a router bit as the main cuter. Has support bearings on both ends of the cutter for added support and tool longevity. Uses a small cheap…
Credit card sized SD and microSD card holder. 15 Jan 2021 update added SD only and microSD only holders added stackable versions of all holders 24 Jan 2021 update minor design tweaks 3mf file added
A stylish pen holder inspired by the design of a V8 car engine block. The EngineBlock Holder is both functional and visually striking, making it the perfect accessory for tech enthusiasts and car lovers alike. Ideal for your desk or…
As small as I could go with functional, working ball joints. Fused the armor and frames together except for the interconnecting, moveable joints. 0.12mm layer 2 walls, 50% infill Auto tree support, build plate, critical Print time <45min…
I finally tried out my 0.2mm nozzle and made a fidget ring for it. This one is all-day wearable just like a normal ring - at least I found it to be; it does have quite some thickness, and you might find that still comfortable or not. If…
| BASIC DESCRIPTION | it is a remix of a model found here: https://www.printables.com/model/20415-sdmicrosd-card-case https://www.printables.com/model/23326-sdmicrosd-card-case-snap-fit this remix has 8 slots for microSD, and one for the…
The Microbot Fidget is based on Hiro's Microbot from Big Hero 6 Both the parts snap fit together. Print details: Material Used : Prusament PLA Prusa Galaxy Black Layer height: 0.15mm Supports: N o Brim: Yes (Only for vertically printed…
This holder can hold up to: 14 USB-Sticks 5 USB-Stick Lids 8 SD-Cards 10 Micro-SD-Cards 6 USB-C Adpater (Micro USB to USB-C) Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2mm Infill: 15%…
This is a remix of a 1U rack mount solution for Dell Micro computers that keeps both computers the same orientation. It should work for all variations of the Dell Micro computer (if in doubt, the computer measurements are 182mm on the…
Compact MicroSD Card Holder for 3D Printing Keep your microSD cards organized and secure with this sleek and compact storage box, designed specifically for 3D printing enthusiasts. The minimalist design ensures it fits effortlessly in…
This is basically what Zack mentioned in the video. I attached the Fusion360 file so you can go nuts with it. This upload contais a 1x3 and 1x2 Model. Update 2023-01-04: Added versions without the magnetholes in the bottom, because its…
This is designed specifically for a Dell Optiplex 7060 MicroPC, though it may be possible that some similar era Dell micros may fit in here too (the model in picture has an i7-8700 for a hint of its age). As you can see, I got a little…
A small (about UNO cards stack sized) dice tower with dice tray included. Both parts print without supports and use about 70 grams of filament. HIGH ROLLS GUARANTEED* The tower can fit a whole set of standard dice for storage. Put on the…
this isn't mine and this is my first reupload so if I have broken rules or etiquette please let me know :) I just wanted to reshare to get the hang of it and honor this great print that I'm yet to print in marble sadly. everything is the…
This is a modular stand to hold the XSC G600 electronic microscope. I designed this because the original stand was terrible. Use 4 x m5 nuts and 4 x m5x30 bolts with hex head to assemble the stand. Important The arm-1.stl (orange x 2) and…
A case for up to 32 memory cards.
18/08/2022 step file uploaded New face fan cover 13/05/2022 V6/ REVO V6 heat set inserts added 1 st Big Thanks to EVA designer for this big effort and nice design for EVA 3.0 Link to EVA 3.0 HERE ! 2 version Standard E3D V6 / REVO V6…
Kids love to sing and these toy microphones can add to the fun. Another optional for use is the tried and true "whomever holds the microphone gets to speak, while others listen". And of course, there's always the classic "drop the mic"…
This Micro SD card box has space for the supplied adapter and is a remix. Left is the Original and right ist mine remix. The left-hand corner of the lid has been widened to make it easier to open the box. Print Settings: You need to use…
This was inspired by Zack Freedman's Gridfinity project. My take on a Micro SD card holder for Gridfinity. I created using Onshape . Added step file for easy changes.
I created a USB, SD card and Micro SD card storage holder for my Honeycomb storge wall. I recently made a version 2 of the stl file. I made a couple of changes to the SD card opening so the cards would fit better. I also made the depth of…
Version 2 is here! Meet the Microlab —a super compact, fully 3D-printable homelab that’s perfect for self-hosted tinkerers who love big ideas but small footprints. At just 5 inches wide and a tiny 160x160mm base, it’s even smaller than a…
