Opticron BGA 8x42 Lens Cap
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.65 – €0.80 net (excluding VAT)
For file: cap_0.15mm_PETG_MK3S_51m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.73 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 51 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Eyepiece lens cap for an Opticron BGA 8x42 monocular
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 0
- Views
- 249
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
This is an eyepiece lens cap for an Opticron 8x42 BGA monocular.
The rubber cap supplied with this monocular is very easy to knock off or misplace as it sticks out from the body of the monocular and has no retention mechanism; this print is a complete replacement. It was designed to fit snugly around the eyepiece and meet the machined step in the monocular body, making it difficult to remove accidentally, in addition a small lanyard hole is built in to allow the cap to be retained when removed.
Printed at 0.15mm layer height in Prusament PETG Jet Black, no supports needed.