Lithophane Christmas Ball
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lithophane Christmas ball
- Ocena
- 5 / 5
- Polubienia
- 154
- Pobrania
- 652
- Wydruki
- 2
- Wyświetlenia
- 4711
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Public Domain
Lithophane Christmas ball made from the Lithophanemaker.com sphere tool .https://lithophanemaker.com/Lithophane%20Sphere.html
Just upload a picture which you prefer and insert the settings :
*Flip image
*Fit image to Sphere or use “crop image” depending on what image you're using
- Lithophane Resolution : 0.20
- Sphere Diameter : 100mm
- Maximum thickness : 2.4mm
- Minimum Thickness: 0.6mm
- Cylinder outer diameter : 20mm
- Cylinder height : 15mm
- Cylinder thickness : 2.4mm
- Cylinder ledge outer diameter : 25mm
- Top hole outer diameter : 0
Print upside down .
Print settings i used :
I used white Esun PLA+
- 0.4mm nozzle
- 0.15mm layer height ( 0.15 Quality)
- Stock prusaslicer settings
- 100% infill
- No support ,you do get some slight strings on top of the ball which are visable .So you could use some support there but it is not necessary.
-Speed : its imported to not print this too fast (around 40mm/s )
- 7.5hour print time and aprox 40grams of filament is used