Fysetc Hotkey Housing and button caps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box to hold the Fysetc Hotkeys for non Voron printers with additional hotkey buttons.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Since upgrading my printer to Klipper, the original LCD touchscreen became obsolete and I found the Fysetc Voron Skirt Hotkeys on AliExpress. Since having some of the most used macros on hand at the printer without always needing an additional device is great I created this housing and the button caps to be a replacement for the LCD.
In the model of the bottom no screw holes are included, since every mounting option would be different. Add your own holes or use something like a tablet/phone stand.
The hotkey clip was also redesigned from the original Fysetc model because I printed mine mine with transparent PET and the original didn't account for the shrinkage. These newly designed have a little more tolerance and fit perfectly on the switches. Print one for every button.
I printed the hotkey clips with transparent PETG and the button caps as well as the housing with PLA+ and added some heated inserts to screw onto the LCD screen arm.
Print settings:
Material: PETG/PLA+
Layer Height: 0.2mm
Walls: 4
Infill: Grid, 20%