Thule Key for Roof Box and Racks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I lost my Key for my older Roof Box from Thule and made one of a Photo.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 315
- Wydruki
- 2
- Wyświetlenia
- 1675
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I lost my Key for my older Roof Box from Thule but i had keys for other racks and boxes. The Profile and Type of key did match and i had a photo of my Keys from the box.
It took me a few hours but i fully measured the key and draw the profile with the notches. This was my first key printing and i was excited if it would work.
I printed it with PLA on my mini+ with the 0,07 ultradetail profile wihout the input shaper.
I used supports and finally it did work!!! Be careful with turning PLA is, you know, not very strong. You can use a flat screwdriver to support the turning when key is fully inserted.
With PETG i cant get that much detail. Maybe someone else does. This would result in more durability.
I copied 3 of the Keys i had. Hope this helps someone with the same problem. I also uploaded the key profile only without the notches.
I added a Core Remover version where there are no notches and it is about 5mm longer to extract the Lock.
Please leave a like! Happy printing