1 / 3
Raspberry Pi Zero SSD1306 OLED Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
A slim case for Raspberry Pi Zero with the SSD1306 0.96'' I2C display and a gpio button. Can be used for various projects (e.g. pwnagotchi, for educational purposes). The case has latches for a nice snap-fit, no hardware needed. It also has holes to allow for better cooling and for the wifi antenna.
These displays can be bought for very cheap from Aliexpress, but there is some variance in the form-factor depending on the source. Some displays could have a loose fit, but should be held in place by the Pi itself.
The GPIO button can be soldered directly to the Pi to ground on pin 9 and data pin 13.
