Redragon G49 Pro Mouse Components + Baseplate for Modding (NOT SE or Base Model)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
components for making custom 3d printed mice
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 385
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
This is a component set for the Redragon G49 Pro (NOT SE or Base Model). The main purpose is to provide tools for making 3D printed mice using these internals.
I've provided the STEP and F3D. The Fusion file is actually a bit of a mess, so editing the STEP is likely better for making changes, but both are provided.
Note: The Lift-Off Distance should mirror the stock's provided you use normal mouse feet (~0.8mm thick). You will need to make adjustments if you use thinner or thicker ones.
The Side Buttons are top mounted normally, but I've made a standoff to bottom mount them as well.
You can get it from Aliexpress (I recommend buying from a Choice Store. I went with https://www.aliexpress.us/item/3256806038369256.html) or MechKeys.
I will create a disassembly video and post mice using these down the line, but in the meantime feel free to go nuts with these elements. This video (for the G305) is basically the same if you want a bit more of an explanation: