Liczymy pasujące modele…
This is a case for external mounting of a Mobius Maxi 4k camera on model rockets with body tube diameters of 3, 4, 5.5 or 7.5 inches. The case mounts using a single #10 or 3/16" screw.
As Aqara U200 doesn't have 10mm diameter adapter, and especially for my EVVA 4KS deadbolt with hole for retainer - I had to model it by myself. Made few iterations before to gain perfect for my purposes. * By the way, it should also fit…
Swivel mount case for ELP 4K Camera Files include: Enclosure - Mount stub options: center, offset left, and offset right. Swivel base - Options: 4, 6, and 7mm through holes, and a ¼-20 threaded hole. Backplate 25-30% infill, recommend to…
Small sturdy travel case for the DJI mini. Holds the drone, and remote tightly. Tested with the DJI mini 4k, but should also fit the mini 2, and mini 2SE. Ideal for travel. Can be printed without supports, print with 5-10% infill.
You will have to look into my other models in order to add this mount.
Google TV Streamer wall mount You will need 3 of M2x4 screws M2x2.5x3.2 inserts Wings uses M4 screws - but you may redraw them based on your needs ___________________________________________________ I have printed this model on side,…
So, after I put together our Vizio television a while ago, I was deeply disappointed at the lack of design integration for the sound bar. It either had to sit in front of the legs, or way behind, and the angle and spacing of the legs was…
Manfrotto Handle for the 3.4 Kg black weight with M8 screw and bold
This is an under desk mount for the Archgon UHD bluray drive. Keeps it out of the way and accessible. Created for the following blu ray drive, unsure if others have similar dimensions and would work: https://www.amazon.com/dp/B07BC9F98J
Design intention This remix is just a hex mesh to the original design and slightly bigger slots to fit an elastic. My print is in TPU for environmental durability, flexibility and layer adhesion so the slots won't break as easily. Looking…
I took the work done by https://www.printables.com/@AJQuick and did some adaptations. This is the second adaptation I did, but feed mostly from my previous model (which I adapted from AJQuick). I needed to do a second adaptation because…
A 1x3x3 stackable Gridfinity holder for the remote of the Elikliv EM4K-AF microscope.
The main purpose is to keep the drive stable and secure on your desk, preventing it from sliding around when inserting or removing discs. It also slightly elevates and positions the drive so the disc tray can open freely without hitting a…
This is a case for external mounting of a Mobius Maxi 4k camera on model rockets with body tube diameters of 3, 4, 5.5 or 7.5 inches. The case mounts using a single #10 or 3/16" screw.
This holds the lid on top of the rail so you can have it out of the way when you remove prints
Layer height: 0.2mm Nozzle temp: 200°C Bed temp: 60°C Print speed: 50–60 mm/s Infill: 15–20% (grid or gyroid) Wall count: 2–3 walls Top/Bottom layers: 4–5 Cooling fan: 100% after first few layers Supports: Off (unless needed) Adhesion:…
Front and back parts glued to the bottom. Cover fixed by TEX. Fan 40mm. Created in Solidworks for makers. Feel free to use it or modify.
It was made for the Hikmicro Alpex 4k, it might need some extra help and an extra screw for the leaver. Screw is an M6x1 with an square lock head, and should be about 55 mm long, something like the one on the photo. The whole thing work…
6x M3 30mm bolts required. Adhesive backed black felt is used to line the inserts.
Layer height: 0.2mm Nozzle temp: 200°C Bed temp: 60°C Print speed: 50–60 mm/s Infill: 15–20% (grid or gyroid) Wall count: 2–3 walls Top/Bottom layers: 4–5 Cooling fan: 100% after first few layers Supports: Off (unless needed) Adhesion:…
Buildplate holder designed for Anycubic Photon Mono 4K printer. It can be made shorter than the original manufacturer part, allowing to print on a media fixed to the buildplate (e.g. PCB, wood...) Current geometry is for Anycubic Photon…
I created this so I could mount my YIZHAN camera to some 2020 I have on my desk. It fits snugly with the camera and has 2 M4 holes either side so you can really make sure its secure. I have included the STEP file if you need to modify.
This case for ur apple tv 4k now has a space for ur homepod mini.
These models are to space your fuse/disconnect bracket up so it matches the lid on a Nissan LEAF battery cell upgrade. Some manufacturers provide a super thick seal to lift the lid up for more clearance. Tested in a 2013 AZE0 24kWh…
GoPro HERO 4K (2024) Compact Storage Case This compact storage case is designed to safely store and protect your GoPro HERO 4K (2024). The case features a snug internal fit to keep the camera secure, along with dedicated compartments for…
This is my remix of idesignstuff's ONN 4K Remote Holder . I slimmed it down a little and added two tangs to the underside which mount it in the pen slot in the F150's console. It can slide forward, backwards, or anywhere in between. It is…
This is a custom 3D-printed alignment shim designed specifically for the Mangoal Ford Maverick 4K Dashcam (Model: MGA 032DBA). Its purpose is to correct the factory camera angle, which can otherwise capture an excessive amount of the…
----for english, please scroll down---- Die EM4K / TM4K-Digitalmikroskope haben zwar ein wirklich miserables Objektiv, aber im Vergleich zu meinem alten Andonstar AD407 mag ich die bessere Reaktionszeit bei Bewegungen, die deutlich höhere…
After failing to find a replacement battery cover for my firestick remote after the latch brock on the original I modeled my own. The specific remote i have was supplied with the Firestick 4k Plus (2nd Gen) which has the back cover end…
Removed the remote holder from RetroFrog's great vertical stand.
NOTE: New version here: https://www.printables.com/model/967009 Shields the USB-cable from impact and movement which may damage the fragile USB-C connector on the BMPCC 4K electronics board. Only suitable for angled USB connectors. Print…
Adapter for Noctigon / Emisar 21700 D4K / DT8K Led light. 1/ 2 Lights version
Insta360 OneRS 4k GoPro Mount for FPV Drone. Fits a standard gopro style mount. Case supports TBS ND filters. Print in your favorite TPU, you will need supports. I have uploaded a Step file so you can edit in your favorite CAD program.
Key cover for easier identification of which key is for which door. Print the cover with a layer height of 0.1 mm and enable Brim for better adhesion to the bed. Nakładka na klucz dla łatwiejszego rozróżnienia, jaki klucz jest, do jakich…
An extendable arm for a document camera. Requires two m3 screws ~ 18mm in length and two nuts.
It makes it easier to remove the battery. Especially helpful if you're using gloves or after flying you don't have much feeling in your fingertips :-) Added version with a pocket clip. Makes it easily accessible and easier to organise in…
As Aqara U200 doesn't have 10mm diameter adapter, and especially for my EVVA 4KS deadbolt with hole for retainer - I had to model it by myself. Made few iterations before to gain perfect for my purposes. * By the way, it should also fit…
The USB C remote can be found with your iPhone so you do not need an AirTag to find it. The design of the case is great, but I wanted a non AirTag version.
Insta360 OneRS 4k GoPro Mount for FPV Drone.Fits a standard gopro style mount. Case supports TBS ND filters. Print in your favorite TPU, you will need supports. I have uploaded a Step file so you can edit in your favorite CAD program. If…
This base replaces the original one found on the NP-01S 4K in order to save up to 9g. Please keep in mind that the buttons on the bottom of the PCB are hard to reach after installation. Feel after installation is close to stock, but…
Its self explanatory, it's just a simple holder for the webcam against the door of the printer to record the prints. I passed from several iterations, but at the end I keep it as simple as possible, no only for easy print but also because…
IPEVO V4K Camera Arm Extension This is a two-segment arm extension for the IPEVO V4K series of document cameras. I have only tested it with the "Pro" version of this camera, but it should have the same dimensions as the normal one. You…
Minor remix of @Founders' nice model (which he remixed from @polmdm's excellent original). Founders intended vertical mounting, but I needed a horizontal mount for under-shelf mounting in an entertainment console. This meant restoring…
Lens Cover for Tomlov EM4k AF Max When used with LED Ringlight use: TomlovEm4kAFMaxLenscap_LedBase TomlovEm4kAFMaxLenscap_LidLed
I designed this super light weight payload holder for the Mini 4K to carry loads suspended with two lines to keep the payload from twisting. I printed with PETG 100% infill, 3 perimeters. It snaps in place at the center of gravity. I have…
Apple TV 4K wall mount for cleaning up the look of the home entertainment center. Kudos to Brahoy for the original design. I hate using supports if I don't have to, so I got into Fusion and drew it up with chamfers at the bottom corners.…
Case for Contixo 4k Camera. Came with a drone. Dimensions match Hero 3/4 but the button locations are slightly different. I used a piece of clear plastic for the lense cover Print Settings Printer: REPRAP Rafts: No **Supports:** No…
RunCam Thumb Pro V2 4K mount for BetaFPV Pavo 30
BMPCC 4k/6k mod that solves a few problems with the BMPCC line: 1. Vastly improved battery life/low cost with NP-F batteries, and flexibility to balance weight/run time with NPF 550/750/950 support. Also add 2 standard 5.5mm output power…
This is a wall mount for a SiliconDust HDHomeRun Flex 4K ATSC 3.0 NextGen TV tuner. Included are the associated Fusion 360 source .fd3 , .3mf, .stl, and G-Code (PTEG 15%, infill) files. Photo shows the top of the case facing out. However,…
An Apple TV 4K remote holder you can install vertically
Apple TV 4K 2022 wall mount (with Cable tie holes)
Full lean angle for the thumb camera and comfy place for a small gps module.
I needed a solution to hide my tv box provided by NOS in Portugal. So i designed and printed this one. It's a loose design without screws, I glued mine in the wall. I had a hole to push the off button if needed. I printed in regular PLA,…
Made this for a friend. He said he keeps his Apple TV on a domino to keep air moving under it. So I made this stand with a vented bottom for air flow. There are two versions. One with an attached stand for the remote and one without. The…
Thanks to the Underware 2.0 Customizer, I have adapted the mount for an AppleTV 4K. This sits well in the mount and can be securely attached under the desk.
Swivel mount case for ELP 4K Camera Files include: Enclosure - Mount stub options: center, offset left, and offset right. Swivel base - Options: 4, 6, and 7mm through holes, and a ¼-20 threaded hole. Backplate 25-30% infill, recommend to…
A simple button guard for the Anglerfish 4K monitor. It stops the on/off button being pressed and flattening the battery. I CNC'd mine but a 3D print would work just as well I expect. Fusion360 CAD file and STL provided. Category: 3D…
This simple canopy allows the user to mount a 30x30 split camera on a 360° pan servo. To mount the camera to the servo I used a simple metal 20mm camera holder and 2x wood screws into the servo horn. Air channels are provided to properly…
This print allows you to mount an Apple TV 4k (3rd Gen) to the back of a Samsung S90D TV. The mounting hooks fit in the groove on the back of the TV and allow you to place the Apple TV anywhere along the back. Printed vertically with a…
Prints in place without supports. The left-right fit could be a little tighter, however it does not fall out. Rubber Feet could help against sliding, as well as some weight in the back. you could glue in some old washers or other stuff.
Made to attach the F7N rear camera (and any other system that uses this yumcha rear) to the rear window on the inside of a ute. Can change the angle for a sedan if there's any interest.
This rain cover is mountable to the end of 73mm diameter LOREX cameras, specifically fitted to the LOREX E892AB H series 4K IP PoE camera. The cover provides rainfall and drip shield so that visibility is improved as well as providing a…
LOREX Camera Base Spacer E892AB H Series 4K is a support base spacer to make camera mount sit further from the support structure. Home eaves with a facia board that extends below the eave may benefit from the camera having more space to…
This is technically not necessary for mounting the FEP or NFEP to the vat. However, it does simplify things and assures that you get no wrinkles or lose corners. As you can see from the pictures, the idea is to put the FEP on the frame,…
This is technically not necessary for mounting the FEP or NFEP to the vat. However, it does simplify things and assures that you get no wrinkles or lose corners. As you can see from the pictures, the idea is to put the FEP on the frame,…
Español: Esta es una carcasa para la fuente de poder ZK-4KX pensada para ser alimentada por medio de USB-C por medio de un múdulo Power Delivery breakout board. English: This is a case for ZK-4KX designed to be powered by USB-C using a…
This is a rack that enables storage of BluRays and 4k UHD movies between 2x4 wood studs. Sort of specific, but it fits an 8" to 8.5" gap between the studs. Could be adjusted to fit other widths. v2 - thickened horizontal support for…
Small stand for Apple TV 4K remote. Haven't printed the version with the Apple Logo yet. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: PLA Black Category: 3D…
Wall-mounted stand for the Geochron Atlas 2B that provides a 1" standoff to ensure proper cooling and does not obstruct any of the buttons or ports. Update: New mount available here for the Geochron Atlas
This is an updated version of my RetroTINK 4k Vertical Stand now with dual remote control storage. So depending on your setup, you can store the remote on either side of the RT4K.
Remixed original in PrusaSlicer 2.4.0 by adding a negative volume to expand the remote opening. Printed with Polylite PLA, 0.3mm DRAFT, and 10% infill.
This 3D-printed mount is designed specifically to fit and secure a AV Access 4K KVM over IP extender box under a desk, helping to keep your workspace organized and free from clutter. I created this mount to provide a simple and efficient…
This is a silly idea that I had and probably not a good one. Why mount an action camera in the front of a quadcopter if it can be mounted in the back? What could possibly go wrong? This was sketched up far too quickly and could be…
This is a 3D lithophane model featuring a person holding a microphone, designed with intricate details and a patterned background. The model is optimized for 3D printing with 0% infill to allow light to pass through, creating a stunning…
This is a compartment box that is same size as the batteries for the DJI Mini 2, 4K and Specta Mini Drones. It will store inside the drone and can hold spare propellers and such. Has a dovetailed sliding lid with a finger catch to held…
Camera cover with microphone cutouts for the Logitech Brio 4k. Friction fit, easy to remove. Printed 0.2mm ASA.
I needed to support my speedbooster Viltrox EF-M2 working together with BMPCC4k (Black Magic Pocket Cinema Camera 4k) in Tilta cage and Sigma 18-35 lens. Unfortunately Smallrig Lens Adapter Support for BMPCC 4K Cage 2769 is not available…
Apple TV 4K Remote Case/Bumper (3rd Generation) – TPU Protective Cover Protect your Apple TV 4K Remote (3rd generation) with this durable and ergonomic TPU case. Designed to improve grip and protect against drops, this bumper-style cover…
Simple screw mount brackets to mount the massive power brick for an LG 32 4K Ergo monitor (32UN880). Attaches with 4x #6 screws. Print with enough walls to make it solid. I used 3D Fuel Pro-Pla and they seem to work great. I'm sure most…
This design was created by printing shapes around a Specta mini 4k drone. It is a tight fit that keeps the drone from moving around. A window in the side of the case allows for charging while the drone is stored. It can be used with or…
This design includes storage for up to 8 propellers, along with the screwdriver that is provided with the drone. Note that PTEG is recommended for this design due to the snap fitting for the screwdriver. This was created by printing…
Components: - Matek BEC12S-PRO 3-12S 5/8/12V 5A - Pasiv Cooler 23 x 23 x 6mm - 4x M2 heat thread
With this minimal propeller cover, you can transport your DJI mini drone safely.
Yet another pan tilt system. The advantage of the system is that two sets of pillars support multiple mounts that could be swapped by unscrewing two M4 screws. Category: R/C Vehicles
Print Settings Printer Brand: AnkerMake Printer: AnkerMakeM5C Rafts: Yes Supports: Yes Resolution: 0.4mm Infill: 30% Filament brand: Anycubic Filament color: Black Filament material: PETG Number of Wall lines: 4 The print is not so clean…
Images will become available 02/30/25. This custom-designed storage container is the perfect solution for keeping your DJI MINI 4K drone and controller secure and organized. Designed for easy 3D printing, this case provides protection,…
It's a simple TPU Print. This print attaches from the bottom of the Motor Arms by spreading the corresponding Blade Brake, and pushing up. The front unit will have a noticeable taper and bigger vertical taper faces the rear. The rear is…
📌 Protective Cover for Xiaomi Mi Box S 4K Remote 🔹 Two versions available! ✅ Version 1 (V1) : Fits the older remote (~15 cm). ✅ Version 2 (V2) : Designed for the new remote (~16 cm). 💡 Bonus : A wall mount is included to store the remote…
A set of adapters to fit the Yi 4K action camera to a Feiyu G4 gimbal. You'll need a new set of screws to use this adapter set. Specifically, M2 Thread, 30mm Long, 0.4mm Pitch screws. I used socket head cap screws from McMaster-Carr.…
![Buildplate holder [Anycubic Photon Mono 4K]](https://media.printables.com/media/prints/a13c6e84-5ad9-43d6-9456-b427b7136c34/images/12259082_cd4430b7-6dc9-4fac-98c3-060652ee83b8_c1206e0d-058b-460c-8131-b7bf47d50b60/20260306_163647.jpg)
![ZK-4KX (XK-4KX) Buck Boost Converter case / enclosure [with kickstand]](https://media.printables.com/media/prints/1206781/images/9063784_e70ddd2d-ac79-4964-b421-66d14797163d_021b12bd-20d7-4a8e-b4c6-feda49e16809/pxl_20250225_104810433.jpg)
