DJI Specta Mini 2/4K and so on Blade Brakes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple TPU Print to Keep Blades In place during Pre-Flight Check and so on.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 453
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
It's a simple TPU Print. This print attaches from the bottom of the Motor Arms by spreading the corresponding Blade Brake, and pushing up. The front unit will have a noticeable taper and bigger vertical taper faces the rear. The rear is pretty much a box, but a slightly higher lock tab is to the rear. The Brakes secures by pressing horizontally to tighten. The elongated open end tabs secure the blades from flopping around during Pre-Flight Checks, maintenance, display, and so forth.
I simply got tired of the darn blades flopping around when I am doing my Pre Flight checks and so forth.
Hope it comes in handy.