1 / 2
Voron Tridex - Mid body with access to pulley screws
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mid body with access to pulley screws
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 277
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
When building my Tridex I quickly found out that there was no way to adjust the pulley screws to centre the pulleys to belt height so I added a massive voron logo that allows access to move them after the printer has been built.
I used joseph-greiner - Drive frames with umbilical mounts filament runout sensors if anyone was keen on them as well:
https://github.com/joseph-greiner/tridex_mods/tree/main/drive_frames_umbilical_mounts