1 / 3
Magnetic B-Drive Motor Cable Cover for Voron 2.4
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnetic cover to hide cables run atop the B-drive unit, similar to the standard cable cover on the A-drive.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 451
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (22)Powiązane
I added a gantry servo for for the Filametrix filament cutter. This left an exposed wire running along the top of the B-drive unit.
Since the B-drive unit doesn't have the extra screw holes for a cable cover (like the A-unit does), I made this magentic. Two 6x3 magnets will snap in place over two of the screws.
The servo mount is not my design. For those interested, you can find it here: https://www.thingiverse.com/thing:6584232