Durafly Tundra Landing Gear support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
used when making your own landing gear from spring steel wire
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Durafly Tundra landing gear support.
The tundra's landing gear wire is made from regular steel wire which tends to bend out of shape from time to time.
This part is to use when making your own improved landing gear from spring steel wire.
I used a vise mounted wire bender ($20 ebay) and made new landing gear wires out of 2.5mm spring steel (music wire) so it retains shape better.
print these in PETG with 100% infill and fit these small supports before making the last two bends.
otherwise you can simply cut your original landing gear wire and use the stock part.
(i wanted to keep my original wires intact)
dont forget to orientate them in the same direction when fitting.
designed in onshape and printed on a Bambu A1 printer in PETG