Wall holder for different cables / Cable clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A screwable cable mounting for cable up to 8 mm with "Compression spring".
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 241
- Wydruki
- 1
- Wyświetlenia
- 1056
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The cable mounting consist of two parts. You can fix the bottom part with two screws e.g. direct on a wall, put a cable in the holder an slide the top cover in the holder. The holder consists a small compression spring that will fix the cable.
The cable holder has space for a cable up to 8mm. Nice to have some in you toolbox in differen colors.
Be carefull that you don`t damage the cable when you are closeing the holder.
You can print both parts without support material. When you use your “Slicer” please place the upper part on its flat side.
Some other versions will follow soon.
When use the part for electrical cable please note your local code.