Fisher & Paykel CosyCot side rails slider and pin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are the sliders and pins for the side rails of the Fisher and Payker CosyCot neonatal heater bed.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
These are the sliders and pins for the side rails of the Fisher and Payker CosyCot neonatal heater bed. I suggest PETG / ABS printing, but the sliders in PLA eventually supported the side rails and bended the central line without breaking. After some months they are still mounted and working correctly so I decided tu upload the models. Be sure to print both at 45° or similar (I used 45°with supports for the pin and a bit of brim for the slider) to achieve better layer adhesion and strenght.
Print Settings
Printer:
BambuLab P1S
Rafts:
No
Yes
Resolution:
0.12MM
100%
Filament: Bambu PLA Blue
Category: 3D Printing