Fisher & Paykel CosyCot side rails slider and pin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are the sliders and pins for the side rails of the Fisher and Payker CosyCot neonatal heater bed.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
These are the sliders and pins for the side rails of the Fisher and Payker CosyCot neonatal heater bed. I suggest PETG / ABS printing, but the sliders in PLA eventually supported the side rails and bended the central line without breaking. After some months they are still mounted and working correctly so I decided tu upload the models. Be sure to print both at 45° or similar (I used 45°with supports for the pin and a bit of brim for the slider) to achieve better layer adhesion and strenght.
Print Settings
Printer:
BambuLab P1S
Rafts:
No
Yes
Resolution:
0.12MM
100%
Filament: Bambu PLA Blue
Category: 3D Printing