1 / 3
Prusa Mini(+) Hotend Draft Diverter — zdjęcie 1
1 / 3

Prusa Mini(+) Hotend Draft Diverter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Deflects hotend fan air away from print bed

Ocena
0 / 5
Polubienia
4
Pobrania
27
Wydruki
1
Wyświetlenia
224
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I was experiencing poor-ish ASA performance on overhangs / warping, but only on 1 side of the part!

This fixes that 😃

It will deflect the hotend air from the fan away from the print bed, ideally fixing poor ABS/ASA overhang performance without the use of part fan

Mount it with some short m3 screws, i just had some spare ones kicking around that I used

I printed this in ASA, with a brim. Though I think PLA may work…

Tagi