1 / 3
Chunky Skirts for Voron 0.2 with G2Z + MiniFridge — zdjęcie 1
1 / 3

Chunky Skirts for Voron 0.2 with G2Z + MiniFridge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A remix of the stock Voron 0.2r2 skirts to accommodate Hartk's G2Z, and TheVoronModder's MiniFridge.

Ocena
0 / 5
Polubienia
9
Pobrania
26
Wydruki
0
Wyświetlenia
322
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Chunky Voron 0.2r2 Skirts

This remix of the stock Voron 0.2r2 skirts was created to keep the look of the stock skirts, while making room for Hartk's G2Z-based Belted Z mod, and pulling the front skirts forward for TheVoronModder's MiniFridge door.

There are middle panel options for going headless, or mounting a 2.8 inch Waveshare display based on Hartk's mount. The rest of the printed parts for the display mount are unmodified, so not included here.

BOM

You'll need a few extra screws.

  • The stock hardware (it uses the same feet, bottom panel, filament sensor parts, etc.)
  • 2x M2x10 self tapping
  • 14x M3x16 BHCS for the skirts instead of the stock M3x8.

Print Settings

The typical Voron settings are fine, so 4 perimeters, 40% infill and 0.4mm nozzle. 

Tagi