1 / 4
Polaroid SX-70 9v Battery Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is custom lower profile battery holder for the Polaroid SX-70 model of cameras.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 476
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is custom lower profile battery holder for the Polaroid SX-70 model of cameras.
- With your power connection coming out of the camera already, solder your 9v connector, buck converter, and switch (if you're using one) to the wires coming out of the camera.
- Fish all wires through the big hole in the “Base” part.
- Glue the “Base” to the camera using E6000 or B7000 glue.
- If using the power switch use a small amount of CA glue to attach it to the “Base”
- Glue the 9v connector to the “Top” part, on the part with the small notch in it.
- Make sure the 9v connector is secure before gluing the “Top" to the "Base” using CA glue.
The reason I suggest E6000 glue is because it will give a really good hold, but if you deiced you want to return the camera to stock you can remove it. You just need to pry it off slowly.