1 / 4
Polaroid SX-70 9v Battery Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is custom lower profile battery holder for the Polaroid SX-70 model of cameras.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 41
- Makes
- 0
- Views
- 476
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This is custom lower profile battery holder for the Polaroid SX-70 model of cameras.
- With your power connection coming out of the camera already, solder your 9v connector, buck converter, and switch (if you're using one) to the wires coming out of the camera.
- Fish all wires through the big hole in the “Base” part.
- Glue the “Base” to the camera using E6000 or B7000 glue.
- If using the power switch use a small amount of CA glue to attach it to the “Base”
- Glue the 9v connector to the “Top” part, on the part with the small notch in it.
- Make sure the 9v connector is secure before gluing the “Top" to the "Base” using CA glue.
The reason I suggest E6000 glue is because it will give a really good hold, but if you deiced you want to return the camera to stock you can remove it. You just need to pry it off slowly.