1984 Honda Shadow VT500c Front Turn signal stem
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print Settings Printer brand: Prusa Printer: I3 MK3S Rafts: Yes Supports: Yes Resolution: 0.2 Infill: stem is 15% pin
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Print Settings
- Printer brand:
Prusa
- Printer:
I3 MK3S
- Rafts:
Yes
- Supports:
Yes
- Resolution:
0.2
- Infill:
stem is 15% pin and nut 80% threaded rod 80%
- Filament material:
petg
- Filament brand:
elegoo petg
- Filament color:
whatever you like I used black
- Notes:
I did not like the way aftermarket stems would droop and bounce so I made a solid stem. This should work with the mid 80's shadows on front only, back stems I will design in future.
I used rafts only on smaller parts, the threaded rod printed at 45 degree angle to bed with organic supports for strength, it will snap if printed vertical
Use a tap to clean up the m12 x 1.75P and the m6 threads in the turn signal retainer just makes life easier
pla the threads are smoother but petg seems to be tighter