1984 Honda Shadow VT500c Front Turn signal stem
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print Settings Printer brand: Prusa Printer: I3 MK3S Rafts: Yes Supports: Yes Resolution: 0.2 Infill: stem is 15% pin
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 0
- Views
- 200
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
Print Settings
- Printer brand:
Prusa
- Printer:
I3 MK3S
- Rafts:
Yes
- Supports:
Yes
- Resolution:
0.2
- Infill:
stem is 15% pin and nut 80% threaded rod 80%
- Filament material:
petg
- Filament brand:
elegoo petg
- Filament color:
whatever you like I used black
- Notes:
I did not like the way aftermarket stems would droop and bounce so I made a solid stem. This should work with the mid 80's shadows on front only, back stems I will design in future.
I used rafts only on smaller parts, the threaded rod printed at 45 degree angle to bed with organic supports for strength, it will snap if printed vertical
Use a tap to clean up the m12 x 1.75P and the m6 threads in the turn signal retainer just makes life easier
pla the threads are smoother but petg seems to be tighter