Nozzle Brush Holder - Trident
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a nozzle brush for my trident and was struggling one that worked with the fixed bed
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 1026
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I wanted a nozzle brush for my trident and was struggling one that worked with the fixed bed. On a 2.4 you can move the bed forward to allow the nozzle to reach the back for the brush but on the trident it is not easy to move the bed.
I have angled the brush 25 degrees to allow the brush to reach the nozzle. I have used a standard brush from the kitchen.
like this one: you can just take the brush bit off the rest.
I cut the brush a little bit but still I could probably cut more and it will still clean.
Here is the brush in action